74LVC16241ADGG是NXP公司的一款缓冲器/驱动器产品，74LVC16241ADGG是16-bit buffer/line driver with 5 V tolerant inputs/outputs; 3-state，本站介绍了74LVC16241ADGG的封装应用图解、特点和优点、功能等，并给出了与74LVC16241ADGG相关的NXP元器件型号供参考。
74LVC16241ADGG - 16-bit buffer/line driver with 5 V tolerant inputs/outputs; 3-state - 缓冲器/驱动器 - 逻辑 - 恩智浦, LLC
The 74LVC16241A is a 16-bit non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs (1OE, 2OE, 3OE and 4OE). Schmitt-trigger action at all inputs makes the circuit highly tolerant for slower input rise and fall times. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer.
Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can beapplied to the outputs. These features allow the use of these devices in mixed 3.3 V and5 V applications.
- 5 V tolerant inputs and outputs for interfacing with 5 V logic
- Wide supply voltage range from 1.2 V to 3.6 V
- CMOS low power consumption
- MULTIBYTE flow-through standard pin-out architecture
- Low inductance multiple power and ground pins for minimum noise and ground bounce
- Direct interface with TTL levels
- High-impedance outputs when VCC = 0 V
- Complies with JEDEC standard:
- JESD8-7A (1.65 V to 1.95 V)
- JESD8-5A (2.3 V to 2.7 V)
- JESD8-C/JESD36 (2.7 V to 3.6 V)
- ESD protection:
- HBM JESD22-A114F exceeds 2000 V
- MM JESD22-A115B exceeds 200 V
- CDM JESD22-C101E exceeds 1000 V.
- Specified from -40 oC to +85 oC and -40 oC to +125 oC.
