PTN5100ABS是NXP公司的一款USB主机控制器产品，PTN5100ABS是USB Type-C power delivery PHY and protocol IC, I2C，本站介绍了PTN5100ABS的封装应用图解、特点和优点、功能等，并给出了与PTN5100ABS相关的NXP元器件型号供参考。
PTN5100ABS - USB Type-C power delivery PHY and protocol IC, I2C - USB主机控制器 - 接口与连接性 - 恩智浦, LLC
PTN5100 is a single port USB Type-C Power Delivery (PD) PHY and Protocol IC that providesType-C Configuration channel interface and USB PD Physical and Protocol layer functionsto a System PD Port Policy Controller (Policy Engine and Device Policy Manager,Alternate mode controller). It complies with USB PD and Type-C specifications and deltaupdates of PD spec. This IC is targeted for a wide range of platforms (Standard NotebookPCs, Desktop PCs, Chromebooks, Tablets, Convertibles, Smart phones) and PC Accessories(e.g. Docks, Monitors, Cable adapters etc.) applications. PTN5100 is architected todeliver robust performance, compliant behavior, configurability and systemimplementation flexibility that are essential to tide over interoperability andcompliance hurdles in the platform applications.
PTN5100 can support system realization of the following PD roles: (i) Provider (P) only,(ii) Provider/Consumer (P/C) (iii) Consumer only (C) (iv) Consumer/Provider (C/P).Further, it can be register programmed to operate in Type-C specific Upstream FacingPort (UFP), Downstream Facing Port (DFP) or Dual Role Port (DRP) role.
PTN5100 implements VCONN low RON switch with register programmable Forward Currentprotection feature. The VCON switch also provides Reverse current protection feature todetect reverse current flow into the system whenever (inductive or) charged cable isunplugged from the connector.
PTN5100 operates from platform power supply VDD, or it can also be powered from USB powerVBUS directly, which is especially required for operation under Dead Battery (DB)condition and certain platform use cases. The host interface operates on VIO supply tofacilitate interfacing to systems that use IO supply rail different from VDD supplyrail.
It provides SPI/I2C interface for system host control/status update. The interface choiceis pre- configured in NXP factory.
PTN5100 is available in a small footprint package option: HVQFN20 4 mm x 4 mm, 0.5 mmpitch.
USB PD and Type-C Features
Complies with USB PD and USB Type-C specifications- Supports implementation of various system PD roles: P, P/C, C, C/P
- Supports Type-C role configurability
- Type-C role (DFP, UFP, DRP) is Non-Volatile Memory (NVM) and registerprogrammable based on OEM platform requirements
- Implements Type-C Connection State machines for various Type-Croles
- Implements UFP role pull down behavior to handle dead batterycondition on battery powered platforms
- Supports register programmable and variable ‘Rp’ indication (forDRP/DFP usage and accessory detection)
- Implements 'Rd' indication on CC pin (for Device sideimplementation)
- Operates autonomously to support usage without a PD Policy control or Alternatemode control MCU
- CC detection/indication scheme based on Type-C role
- Cable/plug connect and disconnect handling (Connection Statemachines) under various Type-C roles
- Indication of orientation detection via CC_ORIENT pin and statusregister(s)
- Debug and Audio Accessory detection and indication in statusregister(s)
- Cooperatively works under the control of Policy controller MCU for power deliverynegotiation and contract(s), Alternate mode and VDM exchanges
- Implements BMC (de)coding, 4B5B symbol (de)coding, CRCgeneration/checking, PD packet assembling/disassembling includingPreamble, SOP, EOP, Good CRC response, Retries, Hard and Cableresets
- PD PHY and Protocol layer interface control and status update handledvia SPI/I2C interface
- SOP Configurability
- Register programmable to generate and receive SOP, SOP', SOP'-debug,SOP", SOP"-debug'' in DFP/DRP (host use case)
- Register programmable to receive and respond on SOP, SOP'-debug andSOP"-debug commands
- Supports low RON VCONN switch with enable/disable (Hi-Z) support
- Capable of maximum current delivery of 1 A over 2.7 V to -5.5 V
- Supports register programmable Forward current protection control
- Supports register programmable reverse current protection
System protection features
- Back current protection on all pins when PTN5100 is unpowered
- CC1 and CC2 pins are 5.5 V tolerant
- VBUS pin and VBUS power path MOSFET enable pins are 28 V tolerant
General
- Delivers (active LOW enable) gate control signals for PMOS Power MOSFETs on VBUSsource and sink power paths
- Provides dedicated IO pin (CC_ORIENT) for indicating Cable/plug orientation andIO pin (DBGACC_FOUND) for indicating Debug accessory detection
- Delivers up to 30 mA (max) for powering Policy controller MCU
- Supports SPI slave interface (SPI modes 0 and 3 supported) up to 30 MHz
- Supports I2C slave interface standard mode (100 kHz), Fast mode (400kHz) and Fast mode plus (1 MHz)
- I2C Device slave address programmable up to 3 values
- Supports 3.3 V or 1.8 V capable I2C-bus or SPI interface
- Supports register access - device configuration, control andstatus/interrupt interfacing through Slave I2C-businterface
- Power supplies - VDD (3.3 V ±10%) or VBUS
- Tolerant up to 28 V on VBUS and operational up to maximum of 25 V onVBUS
- Operating temperature -20 °C to 105 °C
- ESD 8 kV HBM, 1 kV CDM
- Package: HVQFN20 4 mm x 4 mm, 0.5 mm pitch
- PC platforms: Notebook PCs, Desktop PCs, Ultrabooks, Chromebooks
- Tablets, 2:1 Convertibles, Smartphones and Portable devices
- PC accessories/peripherals: Docking, Mobile Monitors, Multi-Function Monitors,Portable/External hard drives, Cable adaptors, Dongles and accessories, etc.
